Navigation
Back to top

Add Second Event to your asset and display various graphic elements
as many times as you want, and more.

Define a video file to be shown as a background, for any asset, while the “Squeeze”  option is turned on.

If you have an audio asset in your playlist, you can assign any asset as a cover
and that asset will be displayed while the audio asset is broadcasted.

Select a number of assets from your rundown playlist and make a loop section. Assets from this section
will be broadcasted until you turn the loop of or set some other asset as next and press “Next” button.

As D.Play can wait for a command to start live event, it also can wait  for a command to stop it.
Turn on “Wait for next” option and D.Play will be  broadcasting live event until “Next” command,
either from live production software, D.Live, or directly from D.Play.

There is an option for adding a live event to your rundown playlist and if “Wait to start live” is on,
the event won’t start at predefined time – it will wait for the  signal from our live production software,
D.Live, that the event has started and it can be broadcasted.

Create AsRunLog, a list of all broadcasted assets, once a month or more often if your local institutions
require so. Or create a list that contains only one category of assets (music, commercial, etc.)
for a specified time period. This can be done only in D.Play client mode, not in D.Play main,
but also in our MAM (Media Asset Management) software - D.Asset.

We have developed a system in which you have one main D.Play which serves as playout, but
you can have more remote clients in which rundown playlist for main D.Play can be edited.

Turn on this option and at the end of the current asset, or at any other point you want, your content  will be
“squeezed” to the one part of the screen and in the rest - an announcement  of the next asset will be shown.

Choose whether you want your logo to be static or animated. It is possible to use an image,
but also a video file as logo.

When the time for update comes, do not worry. We will update your D.Play  to the newest version
without the need to interrupt or stop your program transmission.

When you have an hour or two to fill in your playlist, but the intended assets aren’t ready yet,
use the placeholder and fill it later when the content is ready.

A detailed system log which contains every action taken in D.Play  is created and you can check for
any information about playout functioning that you may need.

Check if assets have the required specifications  (audio/video bitrate, resolution, duration, etc.)
before you allow them to be broadcasted.

You have an option to export next events in HTML format. A number of events that will be exported
can be changed so you can export next 5, 10 or any other number of next events from your playlist.

Electronic Program Guides are required for most distributors. Choose where the file will be exported,
as program announcements for the whole day in XML format.

It is important for viewers to know if the content that is currently on air  is appropriate for children.
Display a rating logo that shows the suitable age for that specific content.

Assets are usually arranged by categories. You can define different logos for each category
(film, sport, etc.) and those logos will be displayed when an asset from certain category is broadcasted.

Define a special logo for a certain asset (for example, Sponsor logo)
and every time that asset is broadcasted - its logo will be displayed.

You can adjust loudness for every asset individually, but with audio normalization – all assets will have
the same sound level, as they should for a professional broadcast.

Choose an asset or a number of assets from your rundown playlist, check “Stream to Facebook” button
and those assets will be automatically streamed when it’s their turn to be broadcasted.

There is an option for basic color correction on the fly.

Multiple positions for main logo are defined so you can choose where your logo will be displayed,
depending on the specific situation.

Check an asset or assets and press “Play as break”. Currently broadcasted asset will be paused
and the selected asset(s) will be broadcasted as commercials (without CG).
When break is over, the previous asset will be continued.

If an important event suddenly occurred and your asset is in the middle of broadcasting,
there is no need to stop it. Simply use “Break to live” option, broadcast the live event,
and after it’s over – turn off “Break to live” and the asset will continue
from the exact spot where you made a break.

Have an extra disk that will serve as proxy storage and where all assets from your current rundown list
will be copied. When an asset has finished broadcasting, it is automatically removed from proxy storage.
This is an additional level of security for your broadcasts.

There is a possibility to stream to 2 different CDNs and Facebook page, at the same time.

Every editing job done in D.Play is frame accurate and D.Play can display the exact frame
selected in video asset.

Basic trimming of assets is available in D.Play. Make a last minute change to your assets and add them
to the rundown playlist without the need to send them back to the montage.

Define an IN and OUT point (trimming options) for any asset  in the rundown playlist,
and those changes will be applied when the asset is broadcasted.

Our D.Play has 8 switchers which can be used for “Live event” occasions. Add this element to
your rundown list and broadcast content directly from switchers instead of pre-recorded content.

Inform your viewers that they are watching a live event, whether it’s a concert,
football game, live news, talk shows or something else.

We predefined a lot of CG elements which we thought were necessary,
from our own experience. But, if you have specific needs
and want more elements – you can easily define and play them in our D.Play.

Set/change title for any asset, directly in D.Play.

Define an asset as music and the artist’s name and the name of the song
will be automatically displayed as a lower third.

Start time for every asset in the rundown playlist is displayed on the screen,  with the precision in milliseconds.

Define a programm as a gap filler playlist and assets from this list will
be broadcasted every time there is some kind of non-functionality
where it’s not possible to broadcast the desired content.

Use crawls, a moving text, to inform your viewers about any subject.
Crawls can go from right to left or from left to right,  depending on the language you use.

When the latest news arrives, it is important that it is broadcasted quickly.  With “Last News” graphical
element you can make sure your viewers know  they are getting fresh information.

A graphical representation of the current position of the asset  that is being broadcasted.

If for any reason you decide to stop the rundown playlist,  a Zebra screen will appear instead of a black screen.

Inform your viewers that they are watching a replay of some program, and not the live event.

Graphic element that shows the next three assets that are goingto be  broadcasted with the exact time
each of them will appear on the screen.  These times are imported directly from the playlist and are
automatically changed every time someone makes the change in the list.

Inform your viewers what will be broadcasted after the current content.

Inform your viewers what is currently being broadcasted.

When commercials begin, logo will be automatically turned off.
At the end of commercials, logo will be turned on again - also automatically.

Display of specific logo to announced that commercial block begins.

Display of slightly different logo than the main logo of your channel.  The viewers won’t notice the difference,
but this can be a discreet signal  to you that you are broadcasting assets from gap filler playlist.

Display of the main logo of your channel which is used in  most of the situations.

If there is any free space in your rundown list, assets from gap filler playlist  will be broadcasted. The same
goes in case of any kind of non-functionality  where is not possible to broadcast the desired content.

If force lock is on, desired content will be broadcasted precisely  at a specified time. 
If the broadcast of previous asset wasn’t finished,  it will be stopped and locked content will be aired.

Lock content to be broadcasted at the specific time. If the broadcast of previous asset wasn’t finished,
D.Play will wait and broadcast desired content after the previous one

If necessary, set your rundown playlist to “loop” mode
and at the end of the list,  D.Play will return to the beginning.

Easily add new assets to the rundown list by simple drag and drop.

In D.Play, rundown lists are created for each day individually.
It is possible to create lists for unlimited number of days in advance.

Make last minute changes to your rundown list when necessary.